Sea gull lighting 6150-44 Installation Guide download pdf

Installation And

Safety Instruction

HC-838

012405

Fill In Item Number On Carton And

File This Sheet For Fixture Reference. ITEM#_______________

INSTALLATION AND SAFETY INSTRUCTIONS

FOR YOUR SAFETY

ASSEMBLY

GENERAL

WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU

ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS

REMOVED OR THE CIRCUIT BREAKER IS SHUT OFF.

You don’t need special tools to install this fixture. Be sure to follow the

steps in the order given. Read instructions carefully. If you are unclear

as to how to proceed, consult a qualified electrician.

Carefully remove the fixture from the carton and check that all parts

are included, as shown in Figures 1 & 2. Be careful not to misplace

any of the screws or parts which are needed to install this fixture.

*OUTLET BOX

*WIRE

CONNECTORS

CANOPY (G)

MOUNTING

SCREWS (I)

FIGURE 1

*NOT SUPPLIED

STEP 1:

Secure rods together (if applicable).

STEP 2:

Feed the fixture wire from the socket assembly (U), through: the rod

assembly (E), and coupling (J) (mounted on canopy (G)).

STEP 3:

Secure rod assembly (E) to coupling (J), and socket assembly (U).

Be sure not to damage the fixture wire.

Note: This fixture can be hung using 1, 2, or 3 rods.

Select the number of rods desired.

ROD ASSEMBLY (E)

RETAINING

SCREWS (P)

GUARDS (Z)

GLASS (N)

FIXTURE BODY

GREEN

GROUNDING

SCREW (D)

*OUTLET BOX

SCREWS (K)

FLAT

STRAP (B)

OFFSET

STRAP (C)

*WIRE

CONNECTORS

MOUNTING

SCREWS (I)

*GROUND WIRE

*OUTLET BOX

GROUNDING AND MOUNTING BAR LOCK UP

FIGURE 2

*NOT INCLUDED

FOR STEM MOUNT

Thread nipple (M) through canopy loop(s). Install canopy loop(s) through

canopy (G), secure with lockwasher (H) and nut (W) (if applicable).

ASSEMBLY FOR CHAIN HUNG

STEP 2:

Install fixture loop (X) onto socket assembly (U).

STEP 3:

Feed the fixture wire from the socket assembly (U), through the fixture

loop (X), and canopy loop (S) (mounted on canopy (G)).

STEP 1:

CAP NUTS (F)

NUT (W )

LOCK WASHER (H)

NIPPLE (M)

CANOPY LOOP (S)

CANOPY (G)

CHAIN (Y)

FIXTURE LOOP (X)

SOCKET ASSEMBLY (U)

FIGURE 3

Line art shown may not exactly match the fixture enclosed. However,

the installation instructions do apply to this fixture.

CAUTION:

Fixtures with photo-cells should be mounted at least 48”

from all sides to avoid reflection of light back onto Photo-cell,

causing the Photo-cell to malfunction or flicker.

1 2

Summary of Contents

Page 1

Installation AndSafety Instruction HC-838 012405Fill In Item Number On Carton And File This Sheet For Fixture Reference. ITEM#_______________INSTAL

Page 2

GROUP A: CONNECT TO BLACKHOUSE WIREBLACKWHITE*PARALLEL WIRE (ROUND & SMOOTH)*PARALLEL WIRE (SQUARE & RIDGED)GROUP B: CONNECT TO WHITEHOUSE WIR

Comments to this Manuals

No comments

Sea gull lighting 6150-44 Installation Guide

Browse online or download Installation Guide for Unknown Sea gull lighting 6150-44. Sea Gull Lighting 6150-44 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Sea gull lighting 6150-44