Sea gull lighting 69029BLE-12 Installation Guide download pdf (Page 2)

Install the Fixture

Use 120 voltMAX 75 Watt

Type A19 Medium Base Lamp.

NOTE: Due to the complexity of this fixture,

assistance will be needed for installation.

ELECTRICAL BOX

MOUNTING PLATE

MOUNTING PLATE SCREW

CANOPY

THREADED NIPPLE

SCREW COLLAR

COLLAR NUT

FIXTURE LOOP

LAMP

SOCKET ASSEMBLY

CHAIN

THUMB NUT

Screw the shorter end of the threaded nipple tightly onto the mounting plate.

Secure the mounting plate to the electrical box with two mounting plate screws.

Screw the screw collar tightly onto the threaded nipple.

Determine the wanted height of the fixture and remove a portion of the chain by opening a link and removing it

from the bottom.

Install the canopy and the collar nut onto the chain (in that order) then install the open link onto the fixture loop and

secure it in place by closing the link.

Weave the cord through the chain, screw collar, canopy, threaded nipple, and out of the electrical box. Trim the cord

leaving enough to make electrical connections.

Connect the fixture to a suitable ground in accordance to local electrical codes.

Connect the white fixture wire (square and rigid tracer) to the neutral power line wire with a wire nut.

Connect the black fixture wire (round and smooth tracer) to the hot power line wire with a wire nut.

Neatly place all the wires into the electrical box, place the canopy onto the ceiling, and secure it in place by screwing

the collar nut tightly onto the screw collar.

Install the lamp by pushing the lamp pins into the large portion of the socket slots and rotate it clockwise to lock it in

place.

Install the shade to the fixture and secure it in place with thumb nuts.

FIXTURE

SHADE

Use type spiral self-MAX 26 Watt

ballasted, GU24 base compact fluorescent

lamp.

1 2 3 4

No comments

Sea gull lighting 69029BLE-12 Installation Guide Page 2