Sea gull lighting 44475-962 Installation Guide Page 1

Browse online or download Installation Guide for Unknown Sea gull lighting 44475-962. Sea Gull Lighting 44475-962 Installation Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Installation And Safety Instructions
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to
this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________
HC-1448
1
12408
Car
efully remove the fixture from the carton and check that all parts
are included, as shown in figure 1 and figure 2. Be careful not to
misplace any of the screws or parts which are needed to install this
fixture.
Be sure the electricity to the system you are working on is turned
off; either the fuse removed or the circuit breaker set at off.
Use of other manufacturers components will void warranty, listing
and create a potential safety hazard.
If you are unclear as to how to proceed, contact a qualified electrician.
You don’t need special tools to install this fixture.
Be sure to follow the steps in the order given.
Read instructions carefully.
Save these instructions.
IMPORTANT SAFETY INSTRUCTIONS
BEFORE YOU BEGIN
T
o clean, wipe fixture with a soft cloth. Clean glass with a mild soap.
Do not use abrasive materials such as scouring pads or powders,
steel wool or abrasive paper.
K
eep this sheet for future reference, and in case you need to order
replacement parts. Parts for this fixture can be ordered from place of
purchase. Be sure to use exact wording from illustration when
ordering parts.
CLEANING
ORDERING PARTS
IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.
INSTALLATION
STEP 2
STEP 1
*OUTLET
BOX
FIGURE 1 *NOT INCLUDED
*OUTLET
BOX
SCREWS
FIXTURE
MOUNTING
SCREWS (B)
UNIVERSAL
MOUNTING
BAR (A)
Run fixture mounting screws (B) through holes in universal mounting
bar (A) all the way down to their heads.
STEP 1:
Using outlet box screws (not supplied) fasten universal mounting bar
(A) to outlet box through slots in universal mounting bar (A). Be sure
fixture mounting screws (B) are perfectly vertical so fixture hangs
straight.
STEP 2:
Page view 0
1 2

Summary of Contents

Page 1 - HC-1448

Installation And Safety Instructions Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply tothis

Page 2

STEP 3INSTALLATION (continued) HC-1448CANOPY (C)GLASS (E)RETAININGRING (F)CAP NUTS (D) FIXTUREGROUND WIRE*WIRECONNECTORSTEP 7GROUNDING INSTRUCTIONS: T

Comments to this Manuals

No comments