Sea gull lighting 44663-839 Installation Guide download pdf

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1432

FIGURE 1

*NOT INCLUDED

81908

Car

efully remove the fixture from the carton and check that all parts

are included, as shown in figure 1. Be careful not to misplace

any of the screws or parts which are needed to install this fixture.

•

Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified electrician.

•

You don’t need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Read instructions carefully.

•

Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE YOU BEGIN

o clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

eep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

Place back plate (D) against wall and mark location for drywall

anchors. Remove back plate (D) and drill appropriate sized holes into

drywall for anchors.

Pull supply wires through appropriate opening in backplate (D). Place

backplate (D) against wall and secure by installing dry wall screws

into anchors. Install outlet box screws (not supplied) into outlet box

through appropriate openings in backplate (D) if applicable.

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

STEP 1:

STEP 2:

INSTALLATION

BACKPLATE

(D)

MOUNTING

SCREWS (F)

GREEN

GROUNDING

SCREW (G)

FIXTURE

GROUND

WIRE

DRYWALL

ANCHOR

STEP 1

STEP 2

*SUPPLY

GROUND

WIRE

*WIRE

CONNECTOR

OPENING

FOR

DRYWALL

SCREWS*

STEP 2

1 2

Summary of Contents

Page 1

Installation And Safety Instructions Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply tothis

Page 2

STEP 4GROUNDING INSTRUCTIONS: The green grounding screw (G) is tobe inserted into the hole with two raised dimples provided on thebackplate (D). Wrap

Comments to this Manuals

No comments

Sea gull lighting 44663-839 Installation Guide

Browse online or download Installation Guide for Unknown Sea gull lighting 44663-839. Sea Gull Lighting 44663-839 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Sea gull lighting 44663-839