Sea gull lighting 61145BLE-814 Installation Guide download pdf

Carefully remove the fixture from the carton and check that all parts are

included, as shown in Figure 1. Be careful not to misplace any of the

screws or parts which are needed to install this fixture.

BEFORE YOU BEGIN

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this

fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1525

22208

• Be sure the electricity to the system you are working on is turned off;

either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified electrician.

• You don’t need special tools to install this fixture.

•

Be sure to follow the steps in the order given.

•

Read instructions carefully.

• Proper wiring is essential to the safe operation of this fixture.

•

Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do

not use abrasive materials such as scouring pads or powders, steel wool

or abrasive paper.

*NOTE:

For Solid Copper Fixtures. Use a good quality automotive wax at

least twice a year to protect your fixture. If this additional care is not taken,

your fixture will turn into a Patina Finish over time.

Keep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when ordering

parts.

CLEANING

ORDERING PARTS

Secure rods together (if applicable).

Feed the fixture wire from the socket assembly (U), through: the rod

assembly (E), and coupling (J) (mounted on canopy (G)).

Secur

e rod assembly (E) to coupling (J), and socket assembly (U). Be sure

not to damage the fixture wire.

FOR STEM MOUNT

STEP 1:

STEP 2:

STEP 3:

Thr

ead nipple (M) through canopy loop (S). Install canopy loop (S) through

canopy (G), secure with lockwasher (H) and nut (W) (if applicable).

Install fixtur

e loop (X) onto socket assembly (U).

Feed the fixtur

e wir

e fr

om the socket assembly (U), thr

ough the fixtur

e loop

(X), and canopy loop (S) (mounted on canopy (G)).

ASSEMBLY FOR CHAIN HUNG

STEP 1:

STEP 2:

STEP 3:

OUTLET BOX

*WIRE

CONNECTORS

CANOPY (G)

MOUNTING

SCREWS (I)

CAP NUTS (F)

FIGURE 1

NOT SUPPLIED

SOCKET

ASSEMBLY (U)

NOTE:

THIS

FIXTURE

CAN BE

HUNG

USING 1, 2,

OR 3 RODS.

SELECT THE

NUMBER

OF RODS

DESIRED.

DIFFUSER (R)

COUPLING (J)

ROD ASSEMBLY (E)

RETAINING RING (T)

FOR STEM MOUNT

DIFFUSER

RING (Z)

MOUNTING

AR (B)

GROUNDING AND MOUNTING

BAR LOCK UP

GREEN

GROUNDING

SCREW (D)

*OUTLET BOX

SCREWS

MOUNTING

BAR (B)

*WIRE

CONNECTORS

MOUNTING

SCREWS (I)

*GROUND WIRE

*OUTLET BOX

FIGURE 2 *NOT INCLUDED

AP NUTS (F)

NUT (W)

LOCK WASHER (H)

NIPPLE (M)

ANOPY LOOP (S)

CANOPY (G)

CHAIN (Y)

FIXTURE LOOP (X)

SOCKET ASSEMBL

Y (U)

FIGURE 3

1 2

Summary of Contents

Page 1 - BAR LOCK UP

Carefully remove the fixture from the carton and check that all parts areincluded, as shown in Figure 1. Be careful not to misplace any of thescrews o

Page 2 - LAMP / BALLAST COMBINATION

Thread nipple (M) through canopy loop (S). Install canopy loop (S) throughcanopy (G), secure with lockwasher (H) and nut (W) (if applicable).Install f

Comments to this Manuals

No comments

Sea gull lighting 61145BLE-814 Installation Guide

Browse online or download Installation Guide for Unknown Sea gull lighting 61145BLE-814. Sea Gull Lighting 61145BLE-814 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Sea gull lighting 61145BLE-814