Sea gull lighting 65662-839 Installation Guide download pdf

STEP 1

STEP 2

STEP 3

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

INSTALLATION

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1436

12508

Carefully remove the fixture from the carton and check that all parts

are included, as shown in figure 1. Be careful not to misplace any of

the screws or parts which are needed to install this fixture.

•

Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

•

Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• To reduce the risk of fire, electric shock, or personal injury, mount

to outlet box or supporting system able to support the weight of

he fixture.

• If you are unclear as to how to proceed, contact a qualified

electrician.

• You don’t need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Under no circumstances should a fixture be hung on house

electrical wires, nor should a swag type fixture be installed on a

ceiling which contains a radiant type heating system.

•

Read instructions carefully.

• Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE YOU BEGIN

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

Keep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

Secure mounting bar (A) to outlet box with outlet box screws (not

supplied). Thread nut (B) on nipple (C) so that 5 threads are exposed

above nut (B). Thread nipple (C) into mounting bar (A) and secure

with nut (B). Thread screw collar (E) to nipple (C).

Using 2 pairs of pliers or chain br

eak, open one link of chain (G) and

connect it to the fixture loop (H) at the top of the fixtur

e. Chain

should be opened outward, do not twist.

STEP 3:

Thread fixture loop (H) to fixture.

STEP 1:

*OUTLET BOX

SCREWS

*WIRE CONNECTORS

SCREW COLLAR (E)

CANOPY (D)

MOUNTING BAR (A)

*GROUND WIRE

SCREW COLLAR

RING (F)

FIGURE 1 *NO

T SUPPLIED

CHAIN (G)

FIXTURE LOOP (H)

DIFFUSER (J)

NIPPLE (C)

NUT (B)

STEP 2:

STEP 4:

Slide the screw collar ring (F) and canopy (H), in that or

der

, over

chain (G). Open one link on the other end of the chain (G) and attach

it to the screw collar (E) which has been mounted to the nipple (C).

BE SURE TO CLOSE ALL CHAIN LINKS COMPLETEL

STEP 4

1 2

Summary of Contents

Page 1

STEP 1STEP 2STEP 3IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.INSTALLATION Installation And Safety Instructions Line art shown may not exa

Page 2

GROUNDING INSTRUCTIONS: The green grounding screw (D) is tobe inserted into the hole with two raised dimples provided on themounting bar (A). Wrap the

Comments to this Manuals

No comments

Sea gull lighting 65662-839 Installation Guide

Browse online or download Installation Guide for Unknown Sea gull lighting 65662-839. Sea Gull Lighting 65662-839 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Sea gull lighting 65662-839