FIGURE 1
FINIAL (A)
HOOD (B)
NOTE: THIS GLASS IS HANDCRAFTED, THE SLIGHT IMPERFECTIONS IN
THE GLASS ADD TO THE AUTHENTICITY OF THE FIXTURE.
• Be sure the electricity to the system you are working on is turned
off; either the fuse removed or the circuit breaker set at off.
• Use of other manufacturers components will void warranty, listing
a
nd create a potential safety hazard.
• If you are unclear as to how to proceed, contact a qualified electrician.
•
Do not install on a post or pole that results in a vertical rise of 25
feet or higher.
• You don’t need special tools to install this fixture.
• Be sure to follow the steps in the order given.
• Proper wiring is essential for the safe operation of this fixture.
• To reduce the risk of fire, electric shock or personal injury, mount to
a system able to support the weight of the fixture.
• Read instructions carefully.
• Save these instructions.
IMPORTANT SAFETY INSTRUCTIONS
Installation And Safety Instructions
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to
this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________
HC-1572
0
71409
T
o clean, wipe fixture with a soft cloth. Clean glass with a mild soap.
Do not use abrasive materials such as scouring pads or powders,
steel wool or abrasive paper.
K
eep this sheet for future reference, and in case you need to order
replacement parts. Parts for this fixture can be ordered from place
of purchase. Be sure to use exact wording from illustration when
o
rdering parts.
CLEANING
ORDERING PARTS
Place hood (B) on top of cage (C). Use r
etaining scr
ews (D) to secur
e.
Make sure no bare wires can be seen outside wire connectors.
A. Use a listed wire connector to connect the fixture hot wire (black
wire, or round and smooth tracer) to the supply hot wire.
B. Use a listed wire connector to connect the fixture common wire
(white wire, or square and rigid) to the supply common wire.
C. Gently try to remove the wires from the connector. If you can
remove the wires, carefully re-do the wiring connection.
GROUNDING INSTRUCTIONS:
Connect the ground wire from the fixture (bare metal or green
insulated wire) to the ground wire from the power supply (bare metal
or green insulated wire) using a small wire connector (not supplied).
NEVER CONNECT GROUND WIRE TO BLACK OR
WHITE POWER SUPPLY WIRES.
Slide fitter (E) onto post. Secur
e in place using three supplied fitter
screws (A).
Install lamp (not supplied) into socket.
INSTALLATION
STEP 1:
STEP 2:
STEP 3:
FINAL ASSEMBLY
STEP 1:
STEP 2:
FITTER (E)
FITTER
SCREWS (A)
CAGE (C)
Thr
ead finial (F) to top of hood (B).
STEP 3:
RETAINING
SCREWS (D)
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals