Sea gull lighting 31627-962 Installation Guide download pdf

Carefully remove the fixture from the carton and check that all parts

are included, as shown in Figure 1 and Figure 2 . Be careful not to

misplace any of the screws or parts which are needed to install this

fixture.

FIGURE 1

*NOT INCLUDED

BEFORE YOU BEGIN

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1558

082709

• Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified

electrician.

• You don’t need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Under no circumstances should a fixture be hung on house

electrical wires, nor should a swag type fixture be installed on a

ceiling which contains a radiant type heating system.

• Read instructions carefully.

• Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

*OUTLET BOX

SCREWS

SCREW

COLLAR (E)

CANOPY (H)

MOUNTING

BAR (A)

CHAIN (S)

NUT (B)

SCREW COLLAR

RING (G)

FIXTURE LOOP (J)

GREEN

GROUNDING

SCREW (D)

NIPPLE (C)

ARMS (M)

Rotate arms (M). Thread fixture loop (J) to top of fixture.

STEP 1:

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

Secure mounting bar (A) to outlet box with outlet box screws (not

supplied). Thread nut (B) on nipple (C) so that 3 threads are exposed

above nut (B). Thread nipple (C) into mounting bar (A) and secure

with nut (B). Thread screw collar (E) to nipple (C).

STEP 2:

Using 2 pairs of pliers or chain breaks, open one link of chain (S) and

connect it to the fixture loop (J) at the top of the fixture. - Please be

sure to open chain link in an outward motion. Do not twist.

STEP 3:

Slide the screw collar ring (G) and canopy (H), in that order, over

chain (S). Open one link on the other end of the chain (S) and attach

it to the screw collar (E) which has been mounted to the nipple (C).

BE SURE TO CLOSE ALL CHAIN LINKS COMPLETELY.

STEP 4:

INSTALLATION

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

Keep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place

of purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

STEP 1

STEP 2

STEP 4

STEP 3

1 2

Summary of Contents

Page 1

Carefully remove the fixture from the carton and check that all partsare included, as shown in Figure 1 and Figure 2 . Be careful not tomisplace any o

Page 2

STEP 5STEP 7After wires are connected, tuck them carefully inside outlet box.Raise canopy (H) against ceiling and thread the screw collar ring (G)to t

Comments to this Manuals

No comments

Sea gull lighting 31627-962 Installation Guide

Browse online or download Installation Guide for Unknown Sea gull lighting 31627-962. Sea Gull Lighting 31627-962 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Sea gull lighting 31627-962