Sea gull lighting 44854-965 Installation Guide download pdf (Page 2)

GROUNDING INSTRUCTIONS: The green grounding screw (G) is to

be inserted into the hole with two raised dimples provided on the

backplate (D). Wrap the ground wire from the fixture (if supplied) and

he ground wire from the outlet box (bare metal or green insulated

wire) around the green grounding screw (G) on the backplate (D) if

uninsulated wire is on the backplate (D), connect the ground wire

from the fixture (if supplied) and the outlet box to it using a small wire

connector (not supplied).

NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER

SUPPLY WIRES.

INSTALLATION (continued) HC-1520

STEP 3:

STEP 4:

ake sure no bare wires can be seen outside wire connectors. After

wires are connected, tuck them carefully inside outlet box. Push the

canopy (I) firmly over the mounting screws (F) and against the wall.

Secure canopy (I) in place by threading cap nuts (E) onto fixture

ounting screws (F).

Make sure no bare wires can be seen outside wire connectors.

Install lamps (not supplied).

lace shade (A) on socket cup (B) and secure by threading retaining

ring (H) onto socket.

FINAL ASSEMBLY

STEP 5:

STEP 6:

STEP 7:

se a listed wire connector to connect the fixture hot wire (black

wire, or round and smooth tracer) to the supply hot wire.

B. Use a listed wire connector to connect the fixture common wire

(white wire, or square and rigid) to the supply common wire.

ently try to remove the wires from the connector. If you can

remove the wires, carefully re-do the wiring connection.

FIGURE 1

*NOT INCLUDED

CANOPY (I)

BACKPLATE

(D)

SOCKET

CUP (B)

SHADE

(A)

RETAINING

RING (H)

MOUNTING

SCREWS

(F)

GREEN

GROUNDING

SCREW (G)

CAP NUTS (E)

FIXTURE

GROUND

WIRE

*SUPPLY

GROUND

WIRE

*WIRE

CONNECTOR

STEP 4

STEP 5

STEP 3

STEP 6

1 2

Comments to this Manuals

No comments

Sea gull lighting 44854-965 Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Unknown Sea gull lighting 44854-965