Sea gull lighting 59440BLE-15 Installation Guide download pdf

FIGURE 1 *NOT INCLUDED

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1502

21208

Carefully remove the fixture from the carton and check that all parts

are included, as shown in figure 1. Be careful not to misplace

any of the screws or parts which are needed to install this fixture.

•

Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified electrician.

•

You don’t need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Under no circumstances should a fixture be hung on house

electrical wires, nor should a swag type fixture be installed on a

ceiling which contains a radiant type heating system.

• Read instructions carefully.

•

Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE YOU BEGIN

o clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

eep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

INSTALLATION

NOTE: FOR FIXTURES PROVIDED WITH 75˚C OR 90˚C SUPPLY WIRE

WARNING ONLY-(THESE WARNINGS ARE PROVIDED ON THE LABEL

AND ON THE FIXTURE CARTON): RISK OF FIRE. MOST DWELLINGS

BUILT BEFORE 1985 HAVE SUPPLY WIRE RATED 60˚C. CONSULT A

QUALIFIED ELECTRICIAN BEFORE INSTALLING.

Secure mounting bar (A) to outlet box with outlet box screws (not

supplied). Thread nut (B) on nipple (C) so that 3 threads are exposed

above nut (B). Thread nipple (C) into mounting bar (A) and secure

with nut (B).

STEP 1:

*OUTLET BOX

*WIRE

CONNECTOR

MOUNTING

BAR (A)

NUT (B)

NIPPLE (C)

RETAINING

SCREWS (E)

CAP NUT (F)

*GROUND

WIRE

*OUTLET

BOX SCREWS

CANOPY

(D)

CENTER

HOLE (H)

DIFFUSER

(G)

1 2

Summary of Contents

Page 1

FIGURE 1 *NOT INCLUDEDInstallation And Safety Instructions Line art shown may not exactly match the fixture enclosed. However, the installation instru

Page 2 - LAMP / BALLAST COMBINATION

GROUNDING INSTRUCTIONS: The green grounding screw is to beinserted into the hole with two raised dimples provided on themounting bar (A). Wrap the gro

Comments to this Manuals

No comments

Sea gull lighting 59440BLE-15 Installation Guide

Browse online or download Installation Guide for Unknown Sea gull lighting 59440BLE-15. Sea Gull Lighting 59440BLE-15 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Sea gull lighting 59440BLE-15