Sea gull lighting 65660-839 Installation Guide download pdf

Att

ach f

ixture loop (K) t

o t

op of f

ixture.

STEP 1:

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1434

03008

Carefully remove the fixture from the carton and check that all parts

are included, as shown in figure 1. Be careful not to misplace

any of the screws or parts which are needed to install this fixture.

•

Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified

electrician.

• You don't need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Read instructions carefully.

• To reduce the risk of fire, electric shock, or personal injury, mount

to outlet box or supporting system able to support the weight of

the fixture

• Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE YOU BEGIN

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

Keep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

Secur

e mounting bar (A) to outlet box with outlet box scr

ews (not

supplied). Thr

ead nut (B) on nipple (C) so that 3 threads ar

e exposed

above nut (B). Thread nipple (C) into mounting bar (A) and secure

with nut (B). Attach collar (E) to nipple (C).

Using 2 pairs of pliers, open one link of chain (J) and connect it to

the fixture loop (K) at the top of the fixtur

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

STEP 2:

STEP 3:

INSTALLATION

FIGURE 1

*NOT INCLUDED

SHADE (G)

*OUTLET BOX

SCREWS

*WIRE

CONNECTORS

COLLAR (E)

CANOPY (H)

MOUNTING BAR (A)

*HOUSE

GROUND

WIRE

GROUND WIRE (F)

COLLAR RING (I)

CHAIN (J)

FIXTURE LOOP (K)

NUT (B)

NIPPLE (C)

GLASS

RET

AINING

RING (L)

Slide the collar ring (I) and canopy (H), in that or

der

, over chain (J).

Open one link on the other end of the chain (J) and attach it to the

collar (E).

BE SURE TO CLOSE ALL CHAIN LINKS COMPLETELY.

STEP 4:

DIFFUSER

RING (M)

1 2

Summary of Contents

Page 1

Attach fixture loop (K) to top of fixture.STEP 1:Installation And Safety Instructions Line art shown may not exactly match the fixture enclosed. Howev

Page 2

GROUNDING INSTRUCTIONS: The green grounding screw (D) is tobe inserted into the hole with two raised dimples provided on themounting bar (A). Wrap the

Comments to this Manuals

No comments

Sea gull lighting 65660-839 Installation Guide

Browse online or download Installation Guide for Unknown Sea gull lighting 65660-839. Sea Gull Lighting 65660-839 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Sea gull lighting 65660-839