Sea gull lighting 78136-08 Installation Guide download pdf (Page 2)

GROUNDING INSTRUCTIONS

Connect the supply ground wire, fixture ground wire, and mounting

bar ground wire (pre attached) using the supplied wiring connector.

Gently try to remove the wires from the connector. If you can

remove the wires, carefully re-do the wiring connection.

INSTALLATION (continued) HC-1568

STEP 4:

fter wires are connected, tuck them carefully inside outlet box.

Raise the canopy (E) to the ceiling allowing for mounting screws (B)

to protrude through key slots (C). Rotate canopy (E) clockwise until

screws (B) are in narrow part of keyslot (C). Tighten mounting screws

(

B) with screwdriver.

nstall lamps.

aise diffuser (H) to canopy so that center pipe (G) protrudes through

diffuser (H). Secure in place by threading finial (D) to center pipe (G).

FINAL ASSEMBLY

STEP 5:

STEP 6:

STEP 7:

1 2

No comments

Sea gull lighting 78136-08 Installation Guide Page 2